600mm Catchpits for EN1401 uPVC Underground Drainage Pipe

Build your 600mm Catch Pit in 3 Easy Steps

1. Choose your base with 110mm or 160mm inlet/outlet 
2. Choose your shaft extension from 1000mm to 2500mm invert (+ 300mm sump).
3. Select your restricted access reducer cap (required if invert is deeper than 1200mm)

Features & Benefits:

• Available in three standard invert depths from 700mm – 1700mm
• Restriction Cap supplied with 1500mm & 2000mm deep chambers to comply with SfA7
• Deeper chambers available up to 6000mm
• Pipework options – 110/160mm EN1401
• Quick and simple to install
• Lightweight – No machinery or lifting equipment required
• Access shafts can be easily cut onsite to required depth
• Granular backfill

For any other configuration such as unequal or offset inlet/outlet options or deeper shafts (up to 6m)  Call us on 01255 258525 for pricing.

Catchpits do not include a silt bucket. Settled solids are typically pumped out or manually cleaned.

These items are fabricated to order and can take up to 3-5 days for delivery.

We also offer a wide range of 600mm twin wall pipes to meet your specific requirements.

600mm silt catch pits for 110mm & 160mm underground drainage