600mm Adoptable PPIC Inspection Chambers for uPVC Systems

600mm Adoptable PPIC Inspection Chambers for uPVC Systems
Product Code: accesso-orange-600
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.


    600mm PPIC Adoptable Inspection Chambers EN1401

    Build your 600mm PPIC Inspection Chamber in 2 easy steps.

    1) Choose your pipe diameter

    2) Choose your invert height

    EN1401 adoptable PPIC inspection chambers are a versatile and cost-effective alternative to concrete and brick inspection chambers.

    Accesso PPIC inspection chambers are suitable for adoptable installations, these should be no deeper than 3m, while non-adoptable inspection chambers can be built up to 6m deep in accordance with Sewers for Adoption 7th Edition (SfA 7).

    For all inverts above 1.2m the shaft must be restricted to a maximum diameter of 350mm using a Reduction Cap.

    AIC600 chambers are designed for connecting to 110mm and or 160mm en1401 upvc sewer systems and incorprate a standard 5-inlet base c/w blanking plugs. These chambers are usually supplied as a single unit, small orders for chambers greater than 2m deep may be shipped as 2-piece kits with a sealed connection. 


    600mm diameter PPIC inspection chambers for SFA7 adoptable drainage systems.